Guide · Deck & Rigging

Deck and Rigging: Ropes, Blocks, Winches, and Hardware

Whether it’s a new halyard, a stronger block, or a spare part for the mast: when it comes to running and standing rigging, the right diameters, breaking loads, and materials are essential. Here is how to find the right parts.

At a Glance

  • Blocks and cleats matching the rope diameter
  • Observe breaking load and working load
  • Select spare parts for masts according to the mast profile
  • Stainless hardware in seawater-resistant quality

What You Should Look For

Ropes and Lines

For sheets and halyards, ropes are available in various materials—from polyester to low-stretch high-performance fibers. Choose the diameter and material to match your blocks, cleats, and winches, as well as the expected load.

Blocks, Cleats, and Halyard Stoppers

Every block and cleat is designed for specific rope diameters and loads. Pay attention to the manufacturer’s specifications regarding diameter, working load, and breaking load.

Masts and Rigging

For Seldén masts and rigging, spare parts are selected based on the mast profile and year of manufacture. We can find the right parts using the profile designation or photos.

Shackles, Eyes, and Bolts

Deck hardware is exposed to wind, salt, and sun. Look for stainless, seawater-resistant materials and the specified load capacity.

Deck & Rigging in the Shop

To the Deck & Rigging Category →

We are currently putting the products for this category online. Are you looking for something specific? Ask us directly—we will be happy to get it for you.

Frequently Asked Questions

Questions about Deck & Rigging

Your question isn’t listed? Write to us.

Overview of all guides

This can be found in the block manufacturer’s specifications. Tell us the block or winch, and we will recommend the appropriate diameter.

The breaking load is the load at which a part fails. The working load is the load with which it can be safely loaded during operation—it is significantly lower.

The easiest way is with the manufacturer, mast profile, and photos of the part. Write to us—we will find the right spare part for you.

For hardware in saltwater environments, A4 (V4A) stainless steel is usually used, as it is more corrosion-resistant than A2.

Consultation

Unsure what fits your boat?

Tell us about your boat, your existing equipment, or your cruising area—we will check compatibility and equipment before you order.

or by email: info@hycon-nautico.es